1 / 3
Bolt and nut for repairing an Acerbis Koerta body armor/protector jacket — zdjęcie 1
1 / 3

Bolt and nut for repairing an Acerbis Koerta body armor/protector jacket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bolt and nut created to replace the pins lost from an Acerbis Koerta motorcycle body armor

Ocena
0 / 5
Polubienia
3
Pobrania
25
Wydruki
0
Wyświetlenia
735
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My Acerbis Koerta motorcycle body armor was missing a few pins. I used NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory  and a caliper and designed a replacement. Printed in PETG, then I used some heat to melt the top of the bolt to the nut so that it will not come loose. A 1 mm washer is also provided, but it can be printed also thinner by scaling the z if required. 

Works great for me and might be useful for others too.