Adjustable Spool for Filament Refills
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print and assemble spool for filament refills. Adjustable for refills with different-sized center tubes.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adjustable spool is loosely based on Felix’s design:
https://www.thingiverse.com/thing:4640225
with substantial modifications.
The basic 60mm wide model is simple with only 5 different plastic parts (you will need multiples of most) and a few screws and nuts.
This spool should work no matter the diameter of the center of your filament. The center bars slide in or out to accommodate.
I have also included a simple, snap-in-place filament clip that can remain in place even while printing.
I have included instructions in a separate PDF file.
NOTE: I have changed the design of all of these parts since I first posted this model so I have replaced the old parts.