1 / 1
FETtec Spike Absorber Mount (w/ Optional Antenna Mount) (ImpulseRC Apex) — zdjęcie 1

FETtec Spike Absorber Mount (w/ Optional Antenna Mount) (ImpulseRC Apex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount to hold the FETtec Spike Absorber on a 20x20mm. It is shaped to fit over the ImpulseRC Regulator Board for the…

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

A mount to hold the FETtec Spike Absorber on a 20x20mm. It is shaped to fit over the ImpulseRC Regulator Board for the Apex.

I used M2x16 bolts to mount it.

Update:

I added a new top cap which can hold your antenna. The "InsAntennaMount" model is for insulated SMA connectors like the TrueRC Matchsitck antenna.

(2) M2x16 bolts with nuts (2) M2x20ish bolts (2) M3x6mm bolts to hold in the antenna.

The 20mm bolts do not screw in, it acts to add rigidity to the mount. Use the barrel nuts (that go under the regulator board) that came with the Apex Kit to hold the bolt in. The Antenna Mount will be "sandwinched" between the Apexs' top plate and the regulator, holding it in place.

Print Settings

Rafts:

No

Supports:

No

**Resolution:**

0.2mm

Infill:

100%

Category: R/C Vehicles

Tagi