LTT Screwdriver in a Box (Tedious Gift Wrapping)

Got a friend of mine an LTT Screwdriver and wanted a more unique “wrapping” so I designed this cage for the screwdriver box where the recipient has to undo 26 M4x40mm bolts to get to the screwdriver.

BOM:

• 26 M4x40mm Bolts 
  • You can go shorter but I recommend at least 20mm of lenght
• 26 M4 threaded inserts (OD 6mm) 
  • Lenght doesn't matter - Enough room inside the posts
  • I also provided the STEP files so you can change the holes for the inserts to fit the ones you might already have
• Super glue for the bow ties (Had to split in half to fit on my MK4S)
  • You could easily mirror in you slicer and fill the gap with a basic shape to print it in one piece if you so desire

Assembly:

• Melt in the threaded inserts. (Did this first so in case I messed something up I didn't have to throw away and reprint one entire half of the case)
  • Don't worry about any plastic below the insert, the bolt will push it away no problem
• Rough up the glueing surface of the bowties and glue them together.
  • They fit best when oriented the same way they were printed, so glue on the bottom layer
• Put in the screwdriver box and bolt it together. Highly recommend a powertool to do that, or the amazing LTT screwdriver :)
  • DON'T OVERTIGHTEN, you can easily crack the print below the bolthead

It's by all means not a perfect design but it was a bit of a last minute idea so it had to be fast, hope you'll like it either way.

Any questions? Feel free to reach out and I'll try to help out as best as I can!

Alos check out my other designs! I have a neat holder for the screwdriver for the Ikea SKADIS peg board!