Posavasos de One Piece | 10 unidades

Love this design? 💖

If you enjoy this aesthetic, please consider supporting my new project, KamiMarks!

While this design looks good here, if you want a printed one (that looks much better), you can find them at KamiMarks. 

And it's not just bookends! You'll also find bookmarks, book trackers, and more accessories for your manga, books, and shelves!

One Piece Coasters | One Piece Fan Art

10 coasters with and without rim are included, as well as a box to store them.

• Coaster thickness: 2/4 millimeters, depending on the version.

• Dimensions: 90 x 90 x 2 millimeters.

• Weight: ±10 grams each unit.

By default, each coaster has a diameter of nine millimeters, but you can adjust it in your slicer to make them a little larger.

They can be printed without AMS by adding the breaks in the layers exposed below and changing the filament, although it is easier using AMS.

They can be printed with a 0.4 mm noozle.

Four colors are needed for the coasters: black, dark gray, silver/light gray, and white.

Printing done with Bambu Lab P1S and verified using Recyled PLA from Smart Materials:

• Black

• Dark Gray

• Silver

• White

Can I sell this coasters? ⛔

No, you cannot.

Recommended print settings:

For the coasters:

• Perimeter generator: Arachne

• Layer height: 0,2 mm

• Perimeters loops: 1

• Top layers: 1

• Bottom layers: 1

• Top layer pattern: Monotonic

• Bottom layer pattern: Monotonic

• Infill Density: 100%

• Infill pattern: Rectilinear

• Solid inner infill pattern: Monotonic

• Platform Adhesion: None

Speed:

• First Layer: 50 mm/s

• First layer infill: 105 mm/s

• Outer perimeter: 200 mm/s

• Inner perimeter: 300 mm/s

• Low dense infill: 270 mm/s

• Inner solid infill: 250 mm/s

• Top solid infill: 60 mm/s (this one is key!)

For the box:

For the box, use your default configuration for solids with a 8% infill. I recommend using cross-hatch or gyroid.

Colours swaps:

• Start with black

• At layer 6 (1,2 mm) swap to dark grey.

• At layer 7 (1,4 mm) swap to grey/silver.

• At layer 8 (1,6 mm) swap to white for the rest.