1 / 8
Sofle Choc Case and Tenting Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a minimal Sofle Choc case and a static tenting stand that can be color-customized.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 843
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
This project contains
- A case and coverplate for the Sofle Choc Split-Keyboard
(the one from https://pandakb.com/products/pcb-kit/sofle-choc-pcb-kit/ ).
- A static-height tenting stand with color-customizable ‘stopper-inserts’ .
The tenting stand also works well with the Sofle-J choc ( this one https://pandakb.com/products/keyboard-kit/sofle-j-choc-zmk-wireless-keyboard-with-5-way-switch/ )
You need:
- for the Case (both halves with the printed top plate)
- 10x M2x8 screws
- 10x M2x4x5 brass heat inserts
- the tenting stand has cut-outs for rubber feet, max 13mm diameter and 1.5mm deep.
- 8x Rubber Feet, 13 x 2.8 out of this pack: https://amzn.eu/d/6EwsNBe . Many others should work, too.
(For a full set) print:
- 6x Stopper-35mm
- 2x Stopper-15mm
- 1x Case-Right
- 1x Tenting-Stand-Right
- 1x Top Plate Right (print upside down)
And for the Left-Hand-Side mirror the following objects in your slicer:
- 1x Case-Right mirrored along X
- 1x Tenting-Stand-Right mirrored along X
- 1x Top Plate Right mirrored along X (print upside down)
Alternatively use the .3mf I provided.
---
Note
I've also made a 4-point-adjustable stand which I used for the last months. It can be found here: https://www.printables.com/model/1315830-sofle-choc-adjustable-tenting-stand