Meshtastic FakeTec "Amade2" NRF52 Node ( Duo color vintage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgraded design as the original Amade2, upgraded with the Faketec NRF52 chipsets for superior runtime and vintage look.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 2826
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPFRONT!
I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other channels are ONLY for my thermal builds!
_________________________________________________________________________________________________________________________
The Amade2 feature's dual GPS module ( GPS/ Beidou) , a buzzer, vibra motor, rotary encoder for canned messages, a max of 2300mAh battery , a Power switch, big notification LED bar and a metal belt clip, neatly packed into a small , compact somewhat rugged case.
The light stick can be printed with a normal FDM printer and translucent Filament, of course it works best if printed with translucent resin as light passes through it much better and more visible.
Used real wood PLA for a authentic wood optic and feel, whatever color or brand you like and trust.
Things your going to need for this build:
GPS module:
3 volt buzzer 8.5x8.5x3mm
Metal belt clip with rivets:
Faketec Node: V4 or V5
gargomoma/fakeTec_pcb: A low-cost nrf52 device.
Oled display: black/white or yellow
Orange LED:
Rotary encoder:
Power switch:
https://de.aliexpress.com/item/1005008584425165.html
Treaded brass melting inserts: M1.6, 5-6mm (OD2.5mm)50pcs
2mm aluminum rods for design elements: Any 2mm diameter rod/wire can be used
M1.6 Screws 5 mm 50 pcs
Copper wire: 0.3mm
Fits Antennas up to 11mm in diameter!
Battery: The following battery is a battery pack and needs to be taken apart!
This means you will get 4 batteries out of it BUT you have to know what you are doing, LIPO batteries can be extremely Dangerous if damaged or shorted out!! YOU HAVE TO KNOW WHAT YOUR DOING!
The Cells are also not protected so your going to need a BMS for each cell!
Battery management System:
I am aware that the ProMicro NRF board does include a BMS but you should never back down on saftey features when it comes to lithium Ion/ Polymer based batteries!!!