Toyoya Yaris (2024) Parcel Shelf String Retaining Clip Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poorly designed clip - actually better to repair than replace!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Absurdly simple design. Just a tapered peg with a flat edge for easier printing!
Dreadful original clip design, despite very sound bonding of the string into the clip and also a very nicely sewn loop at the other end. Spoilt by stupid springy bits on the clip which don't extend far enough to grip the parcel shelf properly and so tend to pull back through.
Would be easy to design a new clip from scratch, BUT that would mean somehow knifing the old clip core off the string which is non-trivial :o) So I tried drilling a hole in the main core section to accept some sort of cotter or split pin, and then for fun I printed a tapered peg which fitted perfectly and turned out stronger than the original clip “springs”.
We have a 1 year old Yaris which is basically showroom condition apart from these shelf clips, one of which was broken and the other already failing. Yes you can buy replacements but if they're only going to last a year then that's very poor value for money at the thick end of ten quid EACH hahahaha, and you'd still have your parcel shelf held up by weak rubbishy clips so print these pegs and do a proper job and then forget about them!
I printed mine with 0.1mm layers but thicker layers would probably do, I just wanted a lot of layers so the taper steps would be thinner and smoother, and it's a very small model.
Please Like this model if you find it useful.
If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)