Parametric HSW Round can/botte/etc. Holder for Honeycomb Storage Wall (2 x HexPeg) (Fusion 360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric holder for bottles/cans/WD-40/etc., designed for Honeycomb Storage Wall w/2x HexPeg (HSW) Fusion 360 f3d file
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully parametric Fusion 360 model of a round-object holder designed specifically for Honeycomb Storage Wall (HSW) systems. Whether you're storing:
- WD-40 cans
- IPA or cleaning solution bottles
- Spray paint
- Fly spray can / polish can / etc.
this holder gives you full flexibility by allowing you to enter the exact diameter of your item and generate a perfectly fitted, snug container, the parametric model also calculates for clearance around your object. So, simply update the “objectDia” parameter with your objects diameter and it will fit snug, export and then slice/print.
---
Note - This model has 2 hex-pegs, one on top of the other - that then plug into the HSW wall inserts - This model is probably more for bigger/heavier objects.
- 2 x hex-pegs for extra strength/load.
- Height 36.8mm - Allows for flush print on top and bottom pegs for HSW inserts
- Recommend for 40mm diameter objects you want to hold in hsw-holder
-------------------------------------------------------------------
For Smaller or lighter objects, or when you only need 1 hex peg supporting the object, you can use this Parametric Model which is only for 1 peg and more flexibility on lip/ring height:
Parametric HSW Round can/botte/etc. Holder for Honeycomb Storage Wall (1 HexPeg) (Fusion 360) by Mingled | Download free STL model | Printables.com
-------------------------------------------------------------------
How to Use the Parametric Model
Measure the diameter (in mm) of the round object you want to hold.
Open the included file:HSW_RoundHolder_Parametric.f3d in Fusion 360.
Go to the top toolbar and choose:Modify > Change Parameters
Look for the parameter called:objectDia
Change the objectDia value to match your measured object diameter (e.g. 65mm).
The holder will automatically resize:
- Inner cavity adjusts to your object
- Slot width and wall size stay proportional
- Mounting pegs stay perfectly aligned
Export the updated model as an .stl or .3mf file
Slice and print using your preferred slicer and printer
Print Settings 0.20mm Layer Height:
| Strength | Walls: | Wall loops | 3-4 |
| Strength | Top/bottom shells: | Bottom shell layer | 3 |
| Strength | Sparse infill | Sparse infill density | 15 |
| Strength | Sparse infill | Spare infill pattern | Cross Hatch |
| Support | Support: | Enable Support | Yes |
| Support | Support: | Type | tree(auto) |
| Support | Support: | Style | Tree Organic |
Peg & Wall Compatibility
This model includes two hexagon mounting pegs to attach to the HSW
It is designed to fit HSW systems using hexagonal peg inserts
Therefore, you will need compatible Honeycomb peg inserts (not included in this file, but available in many HSW peg libraries i.e. from RostaP's model inventory: Honeycomb storage wall by RostaP | Download free STL model | Printables.com)
Included Files
HSW_RoundHolder_Parametric.f3d (Fusion 360 file with editable parameters)
STL variants for common sizes Ive included:
40mm internal diameter-HSW-Parametric-holder.stl
50mm internal diameter-HSW-Parametric-holder.stl
60mm internal diameter-HSW-Parametric-holder.stl
70mm internal diameter-HSW-Parametric-holder.stl
These STL versions are ready to slice and print for some standard bottle and spray can sizes, no editing needed.
Ideal For:
Makers building up their Honeycomb wall system
Tidy storage of cans, bottles, and cleaners