1 / 1
Lumen V3.1 Open PNP Nozzle Rack on Rail with Part Catch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've combined features of two models rail nozzle racks to make a new rack altogether.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Tested on my Lumen v3.1.2 Open PNP Machine
I've combined features of two models. The model is primarily based on the model by dgoodlad but then I picked up the parts catcher feature of the qwertymodo model.
The included discard cup is the exact stl from qwertymodo.
The model was also adjusted to use M5x12mm flat head screws (because that's what I had laying around)