Cycliq 1/8th Turn Mount Twist Lock Bracket - 'Mount C'
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket designed to be used with my mount adapters, with the bolt oriented straight down from the mount face.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is one of my brackets for my Cycliq cameras. Mount style ‘C’ refers to the bolt counterbored straight down from the mount face, and with the locating pyramid/pin hole. Designed for an M4x20 SHCS
This bracket can be used with my handlebar mount and with my seatpost mount. It has a very secure fit, and seems strong, but I haven't put any actual miles on it at the time of publishing.
I printed flat on the small base with a 0.6mm nozzle, no supports, 0.3mm layer height, and a bit of extra flow rate, in PETG-HF. It's stronger than I expected, I figured there would be layer separation issues, but none that I can tell. Works great on both my Fly6 & Fly12.