Clamp Lever [originally] for Warrior Table Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this as a replacement cam lock toggle clamp for the fence of a 10" warrior table saw.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 818
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Note that this design can be used for many other applications besides the exact replacement part. You can scale down the model to get the clamp size how you want it, then fill and resize the hole to your specs.
Broke the original clamp when the fence fell onto concrete. Modeled up the pieces on solidworks to make the replacement. I printed using PETG+, 50% infill, supports, 4 vertical walls, 8 horizontal. might be a little beefier than it needs to be, but being that you have to apply a decent amount of force to it since it is a clamp and all… also printed on its side so that you dont need to worry about the layers being a break point. Have used several times since printing and it works great. feels better than the original. Still working fine after several months.