Remixed Mounts for Vertical LED Light Bars for the Prusa i3 MK3s/MK3s+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I combined the vertical light bars from Dennis with the mounting system from FLink's project. It's easier to use IMHO.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 226
- Wydruki
- 6
- Wyświetlenia
- 1649
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed in 0.03mm DRAFT in PETG without an issue.
I recommend using the Gyroid fill pattern, but you do you.
I really liked the simplicity of the vertical light bars that Dennis created (https://www.prusaprinters.org/prints/81952), but I had my own issues with the insert and twist mounting system that he used for the aluminum rails. I wanted something easier to get on and off if I had to.
That's when I came across FLink's light frame project (https://www.prusaprinters.org/prints/37475-led-frame-mk3s) which I considered to be slightly overkill for my needs but I liked his mounting platform.
I decided I wanted to combine the simplicity of the light bars with the squeeze mounting system that the light frame uses.
These mounting clips are compatible with everything else from Dennis's design found at https://www.prusaprinters.org/prints/81952.
This is my first post related to 3D printing, I just got started and can't wait to post some more.
Thank you to both Dennis and FLink.