Circular Stamping Jig/Guide for 6mm Punch Sets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A circular guide for use with 6mm steel punch sets (letters and numbers). Can be used on flat surfaces or 1" washers.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a circular jig/guide for use with 6mm steel punch sets (3mm letters and numbers). It has 2 digits at the top, with 10 digits below in a circular pattern. The punch set I use is here (OWDEN 36pc steel metal stamping tool set, 1/8").
Instructions:
Simply tape the jig base to a piece of wood/metal/plastic/whatever, insert the stamp with the desired number/letter, and smack it with a hammer! Then take the top tool out and rotate to the next position and repeat the process.
This was originally designed for 1" (25.4mm) washers, but can be used with any surface, as long as you fasten the base somehow (masking tape works).
Fusion 360 file has been included in case you need to make changes to the model.
Parts:
Base accepts a 1" washer, or can be taped to any flat surface
ToolA positions the marking more towards to the top of the guide (see the pictured washer)
ToolB positions the markings closer to the center (and closer together)