Moen Magnetix Shower Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to re-position my shower head a little higher and at a different angle. There is a retail version of this…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted to re-position my shower head a little higher and at a different angle. There is a retail version of this available but this was more fun and customizable. I used 2 stacked 15mm x 3mm magnets to hold the shower head in place. A single magnet didn't hold the shower head in place well enough. I included the Fusion 360 file and a step file for you to modify the magnet hole as necessary. This version was printed with natural clear PLA as it was on the printer at the time.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
No
Supports:
No
0.2
Infill:
15%
Notes:
Epoxied two magnets into the hole at the end of the bracket making sure to position the poles correctly so it attracts the shower head instead of repelling it.
Category: Bathroom