1 / 3
Case for HC-SR04 (mounting in Arduino Car)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple case to protect the ultrasonic sensor HC-SR04, it has pins that fits on Arduino Car frame.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I printed using 0.2mm of layer high and 15% infill, but you can increase the fill depending how much resistance you'll need. Also, I used supports, but the model is able to print off supports, in this case, may you need to adjust the holes with a sandpaper.