Neptune 4 Plus Mount for Comgrow Filament Dryer Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for attaching Comgrow filament dryer box to the Neptune 4 Plus using the stock spool holder. Keeps filament dry.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Simple mount to attach the Comgrow filament dryer box to the Neptune 4 Plus. Keeps filament dry, shortens the feed path, and saves space by lifting the dryer off the table. Held in place using the stock spool holder—just insert the spool holder cylinder through the mount and screw it into the existing bracket.
A hole might need to be made in the plastic to get the right angle for the filament to travel out. There is no better way to print it as putting it too far back will cause too much torque on the arm. I also included the fusion 360 file so you can modify it as you feel necessary! (If you try to angle the box, don't overdo the angle as pulling the filament might make the whole thing fall over)