1 / 1
Jig for Silicone Tube Leveling for Prusa Heatbed — zdjęcie 1

Jig for Silicone Tube Leveling for Prusa Heatbed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A jig to cut appropriately sized pieces of silicone tube for the popular silicone tube leveling mod for Prusa printers.

Ocena
4,941 / 5
Polubienia
75
Pobrania
628
Wydruki
27
Wyświetlenia
3121
Oceny
17

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a jig used to cut 9mm pieces of silicone tube for use with the Silicone Tube bed leveling mod for Prusa MK3 printers. 

The mod is described very well here:

https://github.com/bbbenji/PMSBLM

and here:

https://www.schweinert.com/silicone-bed-level-mod-prusa-mk3/

As always, I have included Fusion 360 source in case you want to modify the design to your needs. Some people use 10mm tubes, but I find that this puts too much pressure on the heatbed, and 9mm gives plenty of adjustment.

NOTE: This jig is a remix of the concept from an original design here: 

https://github.com/PaulGameDev/PrusaMK3_Silicone_Leveling

Many thanks to @Paul_GD on the “The 602 Wasteland” discord for both the idea and the original cutter design. 

Tagi