1 / 2
GM S10 Blazer Jimmy blend door actuator gear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gear for the Chevy Blazer/S10 etc blend door actuator
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 326
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Gear used in the blend door actuator of many GM vehicles from the 90s to 2000s. Picture has the gear installed in the actuator from my Blazer.
Printed in PA6-CF, which is arguably not the best gear material due to abrasiveness , but was the strongest I had on hand. Not sure of the long term performance.