COPRINT CHROMAHEAD COOLING RING 5015 FAN V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get rid of the clunky cover for the CoPrint Chromahead and the stock duct. Fit for 5015 fan.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the corrected version of the original. The ring inner diameter was too tight, and it was causing it to melt. Increased clearance around the nozzle to prevent the ring from getting too hot and melting.
The original CoPrint cover rattled and the duct on it is beyond subpar. Needed a new duct for a core xy printer. All the other options out there were too wide and collided with the gantry when bed leveling. Originaly remixed a model by https://www.printables.com/@LANPartyCEO_1290507. Then I was asked to make it fit a 5015 fan, so here we are.
Mount it with the lower left Chromahead mounting screw, 1 m3x8 mm in the hot end, and 2 m3x20 mm bolts with lock nuts.
Printed with ABS
Orca slicer, tree supports, painted just the necessary overhangs and the duct ports.
.4 mm nozzle
.2 mm layer height