SunFounder Picar X Front bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A front bumper, designed for the SunFounder Picar X robot car. Compatible with or without line sensor.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Bumper for SunFounder Picar X.
Custom-designed and serves as a protective bumper for the front part of the robot so wheels are protected from bumping into objects.
It can be used in place of the front line sensor, or alongside it if you make the right adjustments.
The fit is tight and clean when printed as-is, but depending on your 3D printer's tolerances, you might need to tweak the size a bit in your slicer for best results.
I printed mine in PLA on a K1C, and it snapped on perfectly without any sanding or mods. It’s a simple upgrade if you want to protect the front of your bot or experiment with sensor setups.
You can mount it with the plastic rivets or bolts.
Feel free to remix or tweak it—just keep it non-commercial and credit the original design.
I'm not affiliated with SunFounder or any brand mentioned, and this model isn't intended to promote any product. It's just something I made and wanted to share with the community.