Minicones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minicones originally intended for classroom challenges with Lego Mindstorms robots, but useful for loads of situations!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- GNU General Public License v3.0
These stackable minicones were originally designed for setting out robotics challenges for primary-school classrooms, but are useful for loads of tasks! The small cones stack neatly, and the handy stacker stores them safely and compactly. The provided STLs are for cones that are 48mm diameter at the base, and 30mm height; the stacker will accommodated 32 of these cones. The cones feature handy angle measurement notches around the base. All the STLs should print well in the provided orientations without support. 16 cones fit neatly onto a 220x220 build plate.
The included OpenSCAD files allow you to easily generate cones in different sizes, as well as suitable stacker sleeves and lids. Enjoy!