1 / 6
Kwikset Halo WiFi Deadbolt LiPo Battery Pack — zdjęcie 1
1 / 6

Kwikset Halo WiFi Deadbolt LiPo Battery Pack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I got tired of replacing AA batteries every 6 weeks or less.

Ocena
0 / 5
Polubienia
1
Pobrania
25
Wydruki
0
Wyświetlenia
275
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I like the convenience of my Kwikset Halo smart lock, but I hate replacing batteries all the time in it. I've tried every brand of alkaline and disposable lithium AA batteries with some lasting a little longer than others, but none of them longer than 4 months. I really hate “disposable” batteries anyway. So I designed this caddy to hold a LiPo 3.7v cell and a charge/boost module.

4 fresh AA batteries in series add up to 6-6.2v. A single LiPo pouch battery only outputs 3.7-4.2v. The lock won't operate on less than 4v. The charge/boost module I used will boost 3.7-4.2v all the way to 28v. I set the rheostat at 6.0v and so far my lock has worked perfectly. 

I used PLA for the print with 20% adaptive cubic infill. I used a .06 nozzle and sliced in PrusaSlicer with “normal speed" as my resolution. 

The list of materials you will need are:

2x 8mm wide x 0.1mm thick by 70mm long nickel strips.

A LiPo charge and booster board that will fit in the 40mm x 19mm x 13.45mm space. I used a Teyleten Robot TP4056 with USB-C port from Amazon. Link is here.

A LiPo battery that will fit in the 50mm x 40.5mm x 13.45mm space. I used a 604050 1500mah battery from MakerHawk. Link is here.

Not strictly necessary, but I used a medium size 3M Command Strip to hold the battery and module in place. If the battery or module ever need to be replaced it can be easily pulled from the bottom and everything can be removed.

The nickel strips will take a little bit of finesse to get them in. I made marks in the model where the starting edge should be in order to thread them through the holes and have the ending edge tuck into the pockets I made to hold them. Look at the pictures it should make some kind of sense.

There is a 3mf and a STEP file. I have no idea if this will fit other Kwikset deadbolts.

Tagi