VW Touareg tablet mount for dashboard cubby lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket you can mount to the back of a tablet, such as an iPad Mini 4, that can hook onto the Touareg's…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a bracket you can mount to the back of a tablet, such as an iPad Mini 4, that can hook onto the Touareg's dashboard cubby lid. This was designed for a Touareg T4 (2015-2017), but may also work on older models such as the T3. Please let me know if you confirm that it does work on other models.
Attaching the bracket to the tablet could be done with Velcro as I did, or foam tape, etc.
The best way to print this is by standing it up on the bottom face so that the holes are printed vertically, this way you will not need any supports.
You'll probably want to use PETG over PLA if you'll be leaving it in a hot vehicle. Overture PETG works well for me.
Let me know how it works for you. For me it turned out to be a pretty simple solution.
Video: https://youtu.be/n1o45Tzy-xY
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.30
Infill:
15
Notes:
Overture PETG using Prusament PETG profile works well
Category: Automotive