Tandy 1000 HX Expansion Bay Top Cover (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reproduction Tandy 1000 HX top cover.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My OCD got the better of me, I didnt like the slight gap at the front right or the fit of the rear of the replacement lid for my HX.
So after measuring the original lid from my EX (which is similar, but a bit narrower), I remixed it with some tenth of millimetre modifications to improve the front and rear latching, plus I extended the width of the lower lid section to hide the gaps at the front.
Note: Some HX’s have a burr from manufacturing on the inside front right of the expansion bay that may need to be trimmed or filed flat.
This is the 45 Degree version, the other versions are IMO, impossible to print.
Updates:
- I found a “Bone White” filament from CC3D that is a slightly better colour match. It's got a slight greenish hue, but is much less bright than the warm whites I've tried previously. See the last picture for a comparison with eSun Warm White.
- Another option that might be even better is Overture Matte Beige PLA.
- I've been advised the there is now “Retro Platinum PLA” from Polar Filament available that might also be a good match.
Modified CAD file included.