Steam Deck case to 40mm strap carry adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have 40mm wide strap and want to carry your Steam Deck on it.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 653
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I have Steam Deck and LTT Tech Sack. I made my own over-the-shoulder 40mm wide strap for LTT Tech Sack and I wanted to clip my Steam Deck to it so I have free hands while still carrying it with me.
This was made just a few days before Maker Faire Prague 2025 where I plan to go via train (and play along the way) and I don't want to carry Steam Deck in my hand at the event, I want both hands free. I don't want to bring classic bag with me, I want to go kinda light.
How I printed it
First version was made with PLA since I had it already in the printer. It worked really well, so I switched to Prusa Orange PETG and printed final straps using that. It works as well as PLA one.
I printed it with 0.4mm nozzle, 0,2mm layers, 2mm brim and no supports. It's made to not need supports and where they could help, there is actually not enough room/clearing for them. It fused just a little bit on two places, but could be easily torn apart/divided. Printed in over 30 minutes and weighs around 17 grams. I printed two of them - see images.