Morse Code Forwarder-Arduino Nano
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box, that displays Morse Code by 2 leds controlled by Arduino Nano.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, for some time I´ve been thinking about making a device, that can forward a coded message. I couldn´t find anything on Thingiverse and PrPrinters, so I made my own. It is Arduino powered Morse Code Forwarder.
The whole thing is 90 mm in width, 60mm in depth, and 51mm in height.
You will need these parts:
1x Arduino Nano
1x 400pin breadboard
2x 5mm LED (one green, one red)
2x resistors (don´t know, which I used)
1x 10x15mm 2pin switch (for turning on/off LEDs)
1x 12mm button (resets the Arduino)
4x M3x30mm socket head screws (no need for nuts)
some hot glue
I am putting modified Arduino code in files, so you don´t need to make your own :)
I also included a simple schematic, of how I wired the circuit.
I used this video as inspiration:
I am currently working on v2 with an integrated speaker, so stay tuned!