1 / 6
30mm Fan and GPIO module for snap together Rpi case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A module for the Snap Together Raspberry Pi case (linked below). Made in Fusion 360 with the STEP files provided there.
- Ocena
- 4,5 / 5
- Polubienia
- 5
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 526
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (10)Powiązane
A module for the Snap Together Raspberry Pi case (linked below). Made in Fusion 360 with the STEP files provided there.