1 / 6
RC Jet Fuelstation Tankstation based on Evojet pump
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuel Station version 2 based on the Evojet RFP600 pump.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Fuel Station V2 based on the Evojet RFP600 pump.
I have tried several pumps over the years and just take my word for it and save yourself from leaking pumps or painstakingly slow fuel stops and spend the money on the mentioned pump.
I designed my fuel station around it.
I printed everything in ASA CF but PETG will also work. you will need some supports within the main body. the holder needs to be printed with 3 outlines and around 35% infill.
you will need m3 inserts , an XT60E-M connector and a 3 position switch.