Pokeball Fidget Pen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fidget pen with a Pokeball that has a satisfying sound when it comes together
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
Affiliate links for my favorite filaments to help support what I do are here: Linktree
Available in either a split design for easier printing or in a single part here is my Pokeball fidget pen. Pens must be printed with a brim to reduce chance of failure and if you do encounter failures the best way to reduce them if you are using a non core XY printer is to reduce the speed.
Supports are required but minimal for the one part Pokeball fidget and should pop off easily. The pen uses a standard BiC pen, remove the shell and insert this into the pen - https://amzn.to/3MbFYnk
If you would like to increase/decrease the rate of travel adjust the infill of the fidget.
Ensure that you pause before the handle so that you can place the fidget on the pen.
The lid is pressure fit so layer lines are your friend on this occasion ;)
Happy printing!
Commercial rights for my models can be purchased with a membership to my Patreon: https://www.patreon.com/c/SODA3D