Apple watch Ben 10 Omnitrix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ben 10 Omnitrix for apple watch case and band for series 7 45mm, print in red. Easily adjust for your series and size
- Ocena
- 0 / 5
- Polubienia
- 13
- Wydruki
- 0
- Wyświetlenia
- 3187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Standard Digital File License
Me and a friend were looking all over the internet for this print and could not find an existing one so we created it ourselves!
No additional Hardware needed, everything is printable!
Use the Omnitrix app with this!
This was modeled to fit an apple watch 7 45mm, however it can easily be resized in any slicer to fit other sizes and generations.
I have included the following:
- watch case --printed in white
- full size band link --printed in red black white
- smaller size link --printed in red black white
- 3.8mm button --printed in red
- 8mm button --printed in red
- face lines --printed in black and red
- watch band latch --printed in red black and white
- watch band link pins --printed in red
all files are oriented as they should be printed and are designed to print multicolor without a color swapping system --Simply add a pause to the layers in your slicer, and swap colors mid print.
Assembly;
- links connect with link pins (may have to drill wider holes in links or reduce pin diameter)
- connect watch band latches to end links with pins
- connect watch band to watch case with pins
- 3 of the 8mm buttons snap into the left side of the case (add glue as needed)
- 2 of the 3.8mm buttons snap into the right side of the case )add glue as needed)
- The face lines will line up with the lines on the omnitrix app and must be glued in place
This was designed with the Omnitrix app in mind so the lines are made to look as tho they continue across the entire face.