Coaster Holder for 5 Irish Stout Beer Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A matching storage holder designed to fit 5 custom coasters (90 mm diameter, 5 mm height), perfect for gifting.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
After creating a few custom coaster designs for an upcoming drinking night and to give some away as gifts. I realized they’d look even better presented with a proper storage solution.
This coaster holder follows the same design language as the coasters themselves, maintaining a cohesive look.
It’s designed to fit 5 coasters comfortably, with internal dimensions that accommodate coasters up to 90 mm in diameter and 5 mm in height.
And to achieve making it in two colours I've used the Filament Change post-processing script set to trigger at the correct layer.
Update – Improved Holder Design!
With another party coming up, I wanted to take another shot at improving the coaster holder. I wasn't happy with how the bottom looked on the original. It printed as plain black, and the finish didn’t look great.
To fix that, I’ve redesigned the holder to print in two pieces. This lets you get a cleaner, nicer finish on the bottom.
Colour Change Instructions:
Part 1 (Holder Bottom)
If you're not using a multi-colour (AMS, CFS etc.), you’ll need to either manually change colours or set a colour change in your slicer at layer 15 to switch to the top colour.
Part 2 (Holder Top)
Without a multi-colour setup, you’ll need to swap colours at layer 167.
For the old design you need to do a filament switch at layer 169.
Print Settings I Used:
- Cura Dynamic 0.16 profile
- Ironing on (zig-zag pattern)
- Monotonic top/bottom order enabled
I’ve kept the original version in the files in case anyone prefers that.
Also, I used a more beige/off-white, which I think better represents the top of a beverage compared to the pure white I used originally.
This was printed on my Ender 3 V3 SE (Stock) printer with a 0.4 nozzle, design was made in Fusion 360.
2nd Update – Minor Tweaks & Fixes!
Made a few minor tweaks to the design. I’ve added alignment tabs at the bottom that slot into the top piece. They’re almost a press fit, but I still recommend using some glue for extra security.
I also realized my previous measurement was off by 2 mm at the top, which caused the coasters not to sit flush in the holder. That’s been corrected now.
Hope everyone enjoys it — happy printing! Cheers!