Compound Mag Follower with Rubber Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent dry-firing and give a tactile notification of being out of ammo by preventing the pusher from fully returning.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix allows you to replace the normal Compound Mag follower with one that has a rubber stopper. This prevents the return of the pusher when priming a shot, giving a tactile notification of being out of ammo and preventing dry-firing. The rubber stopper provides cushioning so that the pusher/follower doesn't get damaged.
There are two versions, one for Worker dart heads (e.g. Gen 3 or long dart), and one for Elite dart heads. Depending on print tolerances these will either friction fit (after cutting down the stem) or need to be glued in. I've tested both versions for fit but have only tested the Worker version fully for feeding and function.
These should be printed upside down, with supports (sorry).
I have tested with:
>SMILEY (what I originally designed for - works perfectly)
>Nightingale (stops full trigger pull when out, not really necessary as it's a flywheel, but allows cross-compatibility of mags)
>S200 Fire Rat (works, however as there is a return spring it's hard to then remove the mag as the pusher ‘grabs’ the rubber, I find it better to flip up the mag-hold switch and then release mag)