VEX ROBOTICS Push Back Octoball Mockup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Game element for 2025-2026 Push Back
- Ocena
- 1 / 5
- Polubienia
- 6
- Pobrania
- 218
- Wydruki
- 0
- Wyświetlenia
- 559
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
I made this based off some screenshots from the game reveal, the dimensions of my model should be either really close to the actual thing, if not better. I printed mine with 3 walls and lightning infill out of PLA and it seems strong enough, but feel free to add more strength or tweak settings to your likings. I recommend using a bit of fuzzy skin in the slicer for a more visually accurate model.
You may need a raft and some supports only on the bottom face in order to get good adhesion on the bed.
Remember that this is just a placeholder until we get the actual field elements and such, use this to get a general feel of what you will be working with.
Enjoy!