Höfats Spin Refueler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model makes refueling the Höfats Spin with Ethanol much easier.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The Burner of the Spin needs to be filled with 500ml ethanol at a relatively slow rate to avoid spill.
I designed this tool on basis of the Pythagorean Cup. Simply stack it on top of the cold burner and Fill up to the calibration mark. Once the fluid reaches the mark a siphon is created and exactly 500ml will drain at the perfect rate without further intervention.
The model is designed to be printed in one piece using supports. Make sure to inhibit your slicer from creating supports inside the internal tubings. I used a different material for the support interface for easy removal and an optimal finish.
Caution! Needless to say that working with flamable fluids is dangerous. Choose a suitable material for your print and never use it on a hot burner. Flush with water after use.