1 / 5
Remixed Leg for Stealth Press 1S - easier to print R1 — zdjęcie 1
1 / 5

Remixed Leg for Stealth Press 1S - easier to print R1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Split, warp-resistant remix of the leg_x1_r1s.stl with added inserts and screws for robustness.

Ocena
5 / 5
Polubienia
14
Pobrania
74
Wydruki
1
Wyświetlenia
359
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v3.0

This is a warp-resistant, modular remix of the leg_x1_r1s.stl part from the Stealth Press 1S project. The original printed poorly in ASA with higher infill due to slight warping, which led to print fails or layer bonding issues and eventual cracking. This version splits the leg into two flat parts, connected with 3 standard M3x8 screws and matching heat-set inserts used in the rest of the build. The outer screw holes are slightly offset to further stiffen the 90° joint, and optional shims can help correct for imperfect verticals. The assembled part maintains full compatibility with the R1 version, including the drawer. Tested and working - enjoy!

Tagi