Simrig LED Holder for Rope Light

I created an insert for my sim rig to hold an LED rope light to mount underneath.  This channel is for an RSEAT sim rig, however you may be able to modify it or use it as an example to create one for your rig.  The rope light I purchased to use with this has a 5mm width and 16 foot length (~5 meters) and can be cut in 100mm increments.  I found I used about 12 feet (3.65 meters), so try to avoid purchasing a 10 foot (3 meter) length as it may not be enough.  

The only challenge is working upside down to install it, but once you set it up once, you're done and you don't have to worry about dealing with other leds with adhesive that would eventually fall off.  For areas that may have a leg in the way such as a motion platform that mounts from the top and bottom of the channel such as my front legs, you'll need to remove your bottom bolts to slide the channel through, then re-attach.  Afterwards, I went over the bracket since you can't have a channel in that area, but it's not noticeable.

The pics of the clip/bracket are showing on how they work, for illustration purposes I mounted it to the top of one of my sim rig channels so it's easier to see.