1 / 2
CR6-SE Cooling Duct Remixed with a Creality Logo Cutout — zdjęcie 1
1 / 2

CR6-SE Cooling Duct Remixed with a Creality Logo Cutout

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix tweaks K2Van's Dragon cooling duct to add a Creality logo "cutout" on the face under the fan.

Ocena
0 / 5
Polubienia
7
Pobrania
44
Wydruki
0
Wyświetlenia
1210
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The CR6 Gauge-Mounted Direct-Drive conversion suite posted here by K2Van is an elegant and very well-engineered design.  

This “tweak” simply cuts-out some of the plastic, in the shape of the Creality logo that is on the stock hotend assembly, from the face against which the fan is mounted.  I made this change on my machine because I happen to like the aesthetic.  In theory, this tweak may also shave a little weight off the total suite, but I did not make any concerted effort to achieve or optimize a weight-saving here.  Someone else may want to go beyond this cosmetic change with their own remix, if a reduction of the total mass of that DD system warrants the effort.

Since I happen to prefer and use the “single-fang” 50x50x15 fan duct, I have only remixed that version of the duct, here.  

If there was a demand, I would happily remix and upload the two-fang duct as well.

Tagi