Motor Yacht S.printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor Yacht S.printer is a modern yacht design that comes with a sleek stand for displaying.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Motor Yacht S.printer is my first model boat design and I decided to take on a challenge to create a detailed model yacht. It was also my first multi-color print so please forgive the bits of color bleeding on my print as I am dialing in my flushing volumes. I'm sure you all can get much better results!
I'm looking forward to seeing all the different color combinations you all use with this design, so please share photos!
Printing & Assembly Tips
Supports are only needed on the stand, under the arms. Selecting organic (tree) on build plate only should do the trick. I recommend using some sort of brim on the roof of the aft, where it contacts the build plate.
To assemble, simply apply some glue to the ends of each joiner, insert them into the slots on one half of the boat, and then fit the other half of the boat into position.
Please like it if you do and leave any comments! Joining my club is the best way to show your support and if you're really feeling generous please consider buying me a coffee so I can keep creating!
Check out my TikTok!
Check out my YouTube!
If you like what you see, please consider joining my Patreon.