Gridfinity Kobra S1 Ceramic Hotend Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very basic 2x1x4 units Gridfinity tray to hold 3 ceramic (ie: non-OEM) hotends for the Anycubic Kobra S1.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 219
- Wydruki
- 1
- Wyświetlenia
- 1086
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I ordered an Anycubic Kobra S1 Combo, and saw reviews that said the ceramic replacement hot-ends were a decent ‘quality of life' improvement due to the faster heatup and cooldown times. So, I ordered a set of those. And I need to keep them somewhere, both right now since my Kobra hasn't arrived just yet and after it does arrive…
So, I created this little Gridfinity tray. The tray itself is 2x1x3, you'll probably need an absolute minimum of 4U high, though the more standard 6 is probably better.
Note: it does NOT have any weight/plastic saving features, no holes for magnets or screws, etc. It is a basic tray after all. Leave a comment if those things matter to you and I might consider updating the model.
I used Jayo PETG, white, 0.2 layer height, 3 walls, 3 layers top and bottom, and 10% infill. It doesn't need to hold a complete Kobra S1, just the hotend, after all…..