1 / 1
Addis Clothes Dryer fix repair clip 12.3mm tubing and 3.3mm rods.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A repair clip for an Addis Clothes Dryer with 12.3mm tubing and 3.3mm rod.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 293
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
Repair clip modelled with a little tolerance to reattach a broken rod from the tubing of an Addis Clothes Dryer.
v2 adds a retaining notch inside the clip to fit the recess where the rod was previously welded. It also closes off the outside of the rod hole for neatness.
v3 rounds off the top to reduce sharp edges.
Print on side, PETG is ideal at whatever layer size you prefer.