1 / 3
MAGNETIC DUST COLLECTION FITTING TO SUIT 4" (100MM ) FLEXIBLE DUCTING — zdjęcie 1
1 / 3

MAGNETIC DUST COLLECTION FITTING TO SUIT 4" (100MM ) FLEXIBLE DUCTING

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic fittings enable instant connection and disconnection of machinery to dust collection systems.

Ocena
5 / 5
Polubienia
102
Pobrania
379
Wydruki
8
Wyświetlenia
3092
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is one of a series of dust collection ports that can be found at this link:
DUST COLLECTION FITTINGS.

It's clear opening matches a standard four inch (100mm) pvc drainage system and the thread matches standard 4" (100) flexible ducting.

This fitting is designed to work in conjunction with the 100mm  PVC connector at this link:
MAGNETIC DUST COLLECTION FITTING TO SUIT 4" (100MM PVC)

Some would prefer the greater flexibility of PETG in this environment, however in my home workshop I've been using these for over a year without any issue.

You will need 12 no.  6mm x 8mm(diameter) magnets for each fitting.  The magnets are a firm push fit and should not require any glue - the holes in the base of each magnet recess will allow removal if necessary for any reason, and there is room to add an extra magnet in each recess if magnetic power reduces over time, or if a stronger connection is required.

I recommend fitting each alternative magnet in opposite poles - that will make disconnection very easy, by simply twisting the pieces until they meet their opposite number!


 

Tagi