High FPS 11° BCAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a low hardware BCAR for blasters over 300 fps
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
********This Muzzle Device Is Recommended To Be Orange********
Hardware Required:
-20 M3x10 bolts
-20 7x3x3 Bearings
Link To Bearings:
https://www.amazon.com/uxcell-Bearing-Double-Shielded-Bearings/dp/B07FW18RQY/ref=sr_1_4?crid=2MXDJ99APP1DX&dib=eyJ2IjoiMSJ9.ipVmnCopvPczf2csNsEYL7GZFljxv97lO9JxlSBRK5kITijBzk4iTbvLVArwmbq1zm_ngqQb02uObEisCi_MVc7aP4YnxVeqi07ibYQ24fR1Jz35URhR55apl_hBFOKX70WANqqq1hGc-qctv7YQOwCtCSQV-92oUTUxBZ-N0lApG6XUyHBZX-sRt5xRzuHBE5f5MBTpBQviURmWK_DxJlqYO57tg-b5ruWtlHuohxY.ykDdGZHFCrqVWfRaO54OLvBuEN5pZ2XaL74jTYEY0t8&dib_tag=se&keywords=small+bearings&qid=1746818767&sprefix=small+bearings%2Caps%2C355&sr=8-4
Recommended Print Settings:
Filament:
PLA (different settings are needed for different filaments).
Supports:
yes.
Rafts:
no.
Brim:
highly recommended for printers in nonstable temperature climate, otherwise no
Infill:
15%+
Print Bed Size:
180mm in height at least for printing properly.