red panda woodcut-style print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-color graphic of a red panda in a tree for display and/or use as print block.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this from a photo using Photoshop, Illustrator, and TinkerCAD (https://www.tinkercad.com/things/feUcXYvDTqC-redpanda1print). The base layers are 1 mm thick, and the graphic is 0.6 mm thick. Using a 0.2 mm layer height, set the color change at layer 6 of 8. Depending on your filament (I'm using basic PLA), you might want to lower the nozzle temp for the graphic layers to avoid stringing. I also enabled ironing for “topmost layers only" to smooth out the graphic. I'm planning to try making ink prints with this, so I'll update the info here with any lessons learned. Anyway, please let me know if you like it, and if you have any suggestions for improving it (or feel free to remix yourself).