Case for 3-5/8" Molder head and knives
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case designed to hold 3-5/8" Molder head and 9 sets of cutting knives
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Case for 3-5/8" molder heads and cutting knives. It should be compatible with Shopsmith, Corob, Delta, and Craftsman molder heads and cutting knives, but is only tested with Shopsmith and Corob heads, and Shopsmith, Corob, and Craftsman knives.
Holds 1 molder head and 9 sets of cutting knifes. If the molder head is a style that comes with a spacer, will also hold the spacer as well.
Best to separate the design into parts and print the lid separately from the body. The center standoff spacer has a hole for a threaded insert, specifically Ruthex RX-M4x8.1.
24 Oct 2025 -
Update - Previous versions placed the thread insert at the top of the center post, given how the lid is designed, this places a lot of stress on the center post and can lead to breakage. Thread insert hole has been extended most of the way through the model to permit placing the insert well within the main body of the case, which should mitigate this issue.