#0208 Aquarium Gravel Rake (Various Lengths)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to manipulate gravel at the floor of the aquarium to help shape the terrain, without getting your hands wet.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!

*********
This is a raking tool used to help shape the contours of the gravel terrain at the bottom of the aquarium without disturbing the fish while keeping your hands and arms out of the water.
**********
Key Features:
Minimizes disturbance to aquarium life.
Keeps your hands and arms dry.
Helps prevent contamination of aquarium water (with bacteria from your hands.)
Easy to print, no supports needed.
Uses very little material, but rigid enough to help you manipulate the terrain without getting your hands/arms wet.
Rake includes a large flat surface for larger gravel movement, and flip it over to use the smaller surfaces for finer control.
The coupler that connects the different sized rods have a snap feature that allows you to disconnect the handle rod to insert a different length.
The different lengths of rakes and rods allow you to make 6 different length sizes.
Hole included on the handle rod and coupler to add a zip-tie loop for hanging during storage.
Other things you'll need (optional):
2x small zip-ties.
Recommendations:
Great model for PLA. I used Polymaker PLA Pro for some added flexibility.
6 layers on top and bottom, and 3 vertical wall thickness minimum.
0.2mm layer thickness
Assembly:
Rake can be used without attaching the coupler.
If using the coupler, install the side with no slit facing the rake side, then add a small dab of super glue to permanently hold it in place.
The handle rod can be detached for storage as desired.
Zip-tie loops can be attached on
NOTE: This model relies on an accurate printer. The rods and couple have zero clearance fit ("line-to-line").
Different lengths provided:
Total Length | Rake Length, mm | Coupler Length, mm | Handle Rod Length, mm | Notes |
|---|---|---|---|---|
235 | 210 | 25 | none | Coupler acts as the handle |
295 | 270 | 25 | none | Coupler acts as the handle |
370 | 210 | 10 | 150 | Can disconnect for storage |
430 | 270 | 10 | 150 | Can disconnect for storage |
470 | 210 | 10 | 250 | Can disconnect for storage |
530 | 270 | 10 | 250 | Can disconnect for storage |
**********
If you add this to your collection and/or download the model, please >click< the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.