Hand saw handle for large blades with finger support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hand saw handle for large blades (18.75 mm) with finger support
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 244
- Wydruki
- 3
- Wyświetlenia
- 1215
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This remix enables to mount a double-sided blade of a common handsaw in order to hold it with your hand. In comparison to the original thing the cutout for the blade is larger (18.75 mm, so two-sided blades will fit in), a third screw has been added at the top to secure the blade properly within the handle, and a gutter to the front was added, so you can push with your finger onto the blade.
Use three M4 screws and hex nuts to assemble the handle.
Notes:
It might be useful to iron the surface (Cura setting). Use generated supports for the blade cutout.
This design was remixed from https://www.thingiverse.com/thing:2274031