Kobra Go Printhead with HGX Lite extruder mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom direct drive head for Kobra Go with stock ABL. Replaced hotend with TZ E3 + HGX-LITE = much better print quality.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom direct drive (DD) setup for the Anycubic Kobra Go, designed to work with the stock ABL sensor. The original hotend has been replaced with a TZ E3 2.0, and the extruder is mounted using the HGX-LITE system. This combination results in significantly improved print quality.
The mount for the extruder has been made thicker to improve overall rigidity. The cable guide is positioned on the left side, which made routing the wires simpler in this configuration. Future versions may include right-side or rear-facing cable management with upward routing.
Two additional holes have been added to the front of the mount for mounting optional accessories — currently used to install an ADXL345 accelerometer. These holes are sized for M3 heat-set inserts. Cable management is handled via zip ties.
The files are provided in STEP format to allow easy modification and remixing.