Chicken Waterer Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent your Chicken waterer cups from rotating
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently setup a new lazy man's water system for the chickens that used 1/2in PVC, Some threaded Tees, and chicken waterer cups. Unfortunately I found all too quickly that the ladies like to knock them sideways causing all their water to drain out and I have to refill it daily anyway. So I designed this to fit around the Tees, over the PVC, and slip over the base of the cups to hold them in place. I wanted to make it removable in case I need to replace a cup I don't need to cut the pipe. I also twist them a bit to wash them out.
Recommended to print in PVC
These are the Tees used:https://www.amazon.com/dp/B07CZLYDVP
These are the waterer cups used: https://www.amazon.com/dp/B0BZRWF6TP