1U 10 inch rack DIY PiKVM V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U 10 inch rack DIY PiKVM V1 Made this to stop having the board with all the cables laying around.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Using a RaspBerry PI 3 B+ that i had laying arround I builded a PIKVM DIY V1 KVM.
Since from all the DIY versions that PIKVM offers the V1 is the least popular, I had to create a case/rack mount since i was unable to find any model for this version.
This will support:
HDMI to CSI Camera Adapter ( 4 x M2.5 6mm)
RaspBerry Pi3B+ ( 4 x M2.5 6mm)
RaspBerry Pico2 ( 4 x M2 6mm)
Nevermind the cut/carve on the HDMI side on one of the pictures! my first print showed that i miss calculated the height of the HDMI port, I already fixed it on the .STEP file, but since I didnt wanted to waste all the PETG for such a small fix i carved the port, not my best carving job! but its functional!
Enjoy it!